Candao Founders Pool (CDOFP) Token Tracker | BscScan (2024)

Contract Source Code Verified (Exact Match)

File 1 of 18 : Ownable.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)pragma solidity ^0.8.20;import {Context} from "../utils/Context.sol";/** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * The initial owner is set to the address provided by the deployer. This can * later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */abstract contract Ownable is Context { address private _owner; /** * @dev The caller account is not authorized to perform an operation. */ error OwnableUnauthorizedAccount(address account); /** * @dev The owner is not a valid owner account. (eg. `address(0)`) */ error OwnableInvalidOwner(address owner); event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the address provided by the deployer as the initial owner. */ constructor(address initialOwner) { if (initialOwner == address(0)) { revert OwnableInvalidOwner(address(0)); } _transferOwnership(initialOwner); } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { _checkOwner(); _; } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { return _owner; } /** * @dev Throws if the sender is not the owner. */ function _checkOwner() internal view virtual { if (owner() != _msgSender()) { revert OwnableUnauthorizedAccount(_msgSender()); } } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby disabling any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { _transferOwnership(address(0)); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { if (newOwner == address(0)) { revert OwnableInvalidOwner(address(0)); } _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Internal function without access restriction. */ function _transferOwnership(address newOwner) internal virtual { address oldOwner = _owner; _owner = newOwner; emit OwnershipTransferred(oldOwner, newOwner); }}

File 2 of 18 : draft-IERC6093.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)pragma solidity ^0.8.20;/** * @dev Standard ERC20 Errors * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens. */interface IERC20Errors { /** * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers. * @param sender Address whose tokens are being transferred. * @param balance Current balance for the interacting account. * @param needed Minimum amount required to perform a transfer. */ error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed); /** * @dev Indicates a failure with the token `sender`. Used in transfers. * @param sender Address whose tokens are being transferred. */ error ERC20InvalidSender(address sender); /** * @dev Indicates a failure with the token `receiver`. Used in transfers. * @param receiver Address to which tokens are being transferred. */ error ERC20InvalidReceiver(address receiver); /** * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers. * @param spender Address that may be allowed to operate on tokens without being their owner. * @param allowance Amount of tokens a `spender` is allowed to operate with. * @param needed Minimum amount required to perform a transfer. */ error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed); /** * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals. * @param approver Address initiating an approval operation. */ error ERC20InvalidApprover(address approver); /** * @dev Indicates a failure with the `spender` to be approved. Used in approvals. * @param spender Address that may be allowed to operate on tokens without being their owner. */ error ERC20InvalidSpender(address spender);}/** * @dev Standard ERC721 Errors * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens. */interface IERC721Errors { /** * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20. * Used in balance queries. * @param owner Address of the current owner of a token. */ error ERC721InvalidOwner(address owner); /** * @dev Indicates a `tokenId` whose `owner` is the zero address. * @param tokenId Identifier number of a token. */ error ERC721NonexistentToken(uint256 tokenId); /** * @dev Indicates an error related to the ownership over a particular token. Used in transfers. * @param sender Address whose tokens are being transferred. * @param tokenId Identifier number of a token. * @param owner Address of the current owner of a token. */ error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner); /** * @dev Indicates a failure with the token `sender`. Used in transfers. * @param sender Address whose tokens are being transferred. */ error ERC721InvalidSender(address sender); /** * @dev Indicates a failure with the token `receiver`. Used in transfers. * @param receiver Address to which tokens are being transferred. */ error ERC721InvalidReceiver(address receiver); /** * @dev Indicates a failure with the `operator`’s approval. Used in transfers. * @param operator Address that may be allowed to operate on tokens without being their owner. * @param tokenId Identifier number of a token. */ error ERC721InsufficientApproval(address operator, uint256 tokenId); /** * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals. * @param approver Address initiating an approval operation. */ error ERC721InvalidApprover(address approver); /** * @dev Indicates a failure with the `operator` to be approved. Used in approvals. * @param operator Address that may be allowed to operate on tokens without being their owner. */ error ERC721InvalidOperator(address operator);}/** * @dev Standard ERC1155 Errors * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens. */interface IERC1155Errors { /** * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers. * @param sender Address whose tokens are being transferred. * @param balance Current balance for the interacting account. * @param needed Minimum amount required to perform a transfer. * @param tokenId Identifier number of a token. */ error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId); /** * @dev Indicates a failure with the token `sender`. Used in transfers. * @param sender Address whose tokens are being transferred. */ error ERC1155InvalidSender(address sender); /** * @dev Indicates a failure with the token `receiver`. Used in transfers. * @param receiver Address to which tokens are being transferred. */ error ERC1155InvalidReceiver(address receiver); /** * @dev Indicates a failure with the `operator`’s approval. Used in transfers. * @param operator Address that may be allowed to operate on tokens without being their owner. * @param owner Address of the current owner of a token. */ error ERC1155MissingApprovalForAll(address operator, address owner); /** * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals. * @param approver Address initiating an approval operation. */ error ERC1155InvalidApprover(address approver); /** * @dev Indicates a failure with the `operator` to be approved. Used in approvals. * @param operator Address that may be allowed to operate on tokens without being their owner. */ error ERC1155InvalidOperator(address operator); /** * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation. * Used in batch transfers. * @param idsLength Length of the array of token identifiers * @param valuesLength Length of the array of token amounts */ error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);}

File 3 of 18 : ERC1155.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/ERC1155.sol)pragma solidity ^0.8.20;import {IERC1155} from "./IERC1155.sol";import {IERC1155Receiver} from "./IERC1155Receiver.sol";import {IERC1155MetadataURI} from "./extensions/IERC1155MetadataURI.sol";import {Context} from "../../utils/Context.sol";import {IERC165, ERC165} from "../../utils/introspection/ERC165.sol";import {Arrays} from "../../utils/Arrays.sol";import {IERC1155Errors} from "../../interfaces/draft-IERC6093.sol";/** * @dev Implementation of the basic standard multi-token. * See https://eips.ethereum.org/EIPS/eip-1155 * Originally based on code by Enjin: https://github.com/enjin/erc-1155 */abstract contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI, IERC1155Errors { using Arrays for uint256[]; using Arrays for address[]; mapping(uint256 id => mapping(address account => uint256)) private _balances; mapping(address account => mapping(address operator => bool)) private _operatorApprovals; // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json string private _uri; /** * @dev See {_setURI}. */ constructor(string memory uri_) { _setURI(uri_); } /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) { return interfaceId == type(IERC1155).interfaceId || interfaceId == type(IERC1155MetadataURI).interfaceId || super.supportsInterface(interfaceId); } /** * @dev See {IERC1155MetadataURI-uri}. * * This implementation returns the same URI for *all* token types. It relies * on the token type ID substitution mechanism * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP]. * * Clients calling this function must replace the `\{id\}` substring with the * actual token type ID. */ function uri(uint256 /* id */) public view virtual returns (string memory) { return _uri; } /** * @dev See {IERC1155-balanceOf}. */ function balanceOf(address account, uint256 id) public view virtual returns (uint256) { return _balances[id][account]; } /** * @dev See {IERC1155-balanceOfBatch}. * * Requirements: * * - `accounts` and `ids` must have the same length. */ function balanceOfBatch( address[] memory accounts, uint256[] memory ids ) public view virtual returns (uint256[] memory) { if (accounts.length != ids.length) { revert ERC1155InvalidArrayLength(ids.length, accounts.length); } uint256[] memory batchBalances = new uint256[](accounts.length); for (uint256 i = 0; i < accounts.length; ++i) { batchBalances[i] = balanceOf(accounts.unsafeMemoryAccess(i), ids.unsafeMemoryAccess(i)); } return batchBalances; } /** * @dev See {IERC1155-setApprovalForAll}. */ function setApprovalForAll(address operator, bool approved) public virtual { _setApprovalForAll(_msgSender(), operator, approved); } /** * @dev See {IERC1155-isApprovedForAll}. */ function isApprovedForAll(address account, address operator) public view virtual returns (bool) { return _operatorApprovals[account][operator]; } /** * @dev See {IERC1155-safeTransferFrom}. */ function safeTransferFrom(address from, address to, uint256 id, uint256 value, bytes memory data) public virtual { address sender = _msgSender(); if (from != sender && !isApprovedForAll(from, sender)) { revert ERC1155MissingApprovalForAll(sender, from); } _safeTransferFrom(from, to, id, value, data); } /** * @dev See {IERC1155-safeBatchTransferFrom}. */ function safeBatchTransferFrom( address from, address to, uint256[] memory ids, uint256[] memory values, bytes memory data ) public virtual { address sender = _msgSender(); if (from != sender && !isApprovedForAll(from, sender)) { revert ERC1155MissingApprovalForAll(sender, from); } _safeBatchTransferFrom(from, to, ids, values, data); } /** * @dev Transfers a `value` amount of tokens of type `id` from `from` to `to`. Will mint (or burn) if `from` * (or `to`) is the zero address. * * Emits a {TransferSingle} event if the arrays contain one element, and {TransferBatch} otherwise. * * Requirements: * * - If `to` refers to a smart contract, it must implement either {IERC1155Receiver-onERC1155Received} * or {IERC1155Receiver-onERC1155BatchReceived} and return the acceptance magic value. * - `ids` and `values` must have the same length. * * NOTE: The ERC-1155 acceptance check is not performed in this function. See {_updateWithAcceptanceCheck} instead. */ function _update(address from, address to, uint256[] memory ids, uint256[] memory values) internal virtual { if (ids.length != values.length) { revert ERC1155InvalidArrayLength(ids.length, values.length); } address operator = _msgSender(); for (uint256 i = 0; i < ids.length; ++i) { uint256 id = ids.unsafeMemoryAccess(i); uint256 value = values.unsafeMemoryAccess(i); if (from != address(0)) { uint256 fromBalance = _balances[id][from]; if (fromBalance < value) { revert ERC1155InsufficientBalance(from, fromBalance, value, id); } unchecked { // Overflow not possible: value <= fromBalance _balances[id][from] = fromBalance - value; } } if (to != address(0)) { _balances[id][to] += value; } } if (ids.length == 1) { uint256 id = ids.unsafeMemoryAccess(0); uint256 value = values.unsafeMemoryAccess(0); emit TransferSingle(operator, from, to, id, value); } else { emit TransferBatch(operator, from, to, ids, values); } } /** * @dev Version of {_update} that performs the token acceptance check by calling * {IERC1155Receiver-onERC1155Received} or {IERC1155Receiver-onERC1155BatchReceived} on the receiver address if it * contains code (eg. is a smart contract at the moment of execution). * * IMPORTANT: Overriding this function is discouraged because it poses a reentrancy risk from the receiver. So any * update to the contract state after this function would break the check-effect-interaction pattern. Consider * overriding {_update} instead. */ function _updateWithAcceptanceCheck( address from, address to, uint256[] memory ids, uint256[] memory values, bytes memory data ) internal virtual { _update(from, to, ids, values); if (to != address(0)) { address operator = _msgSender(); if (ids.length == 1) { uint256 id = ids.unsafeMemoryAccess(0); uint256 value = values.unsafeMemoryAccess(0); _doSafeTransferAcceptanceCheck(operator, from, to, id, value, data); } else { _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, values, data); } } } /** * @dev Transfers a `value` tokens of token type `id` from `from` to `to`. * * Emits a {TransferSingle} event. * * Requirements: * * - `to` cannot be the zero address. * - `from` must have a balance of tokens of type `id` of at least `value` amount. * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the * acceptance magic value. */ function _safeTransferFrom(address from, address to, uint256 id, uint256 value, bytes memory data) internal { if (to == address(0)) { revert ERC1155InvalidReceiver(address(0)); } if (from == address(0)) { revert ERC1155InvalidSender(address(0)); } (uint256[] memory ids, uint256[] memory values) = _asSingletonArrays(id, value); _updateWithAcceptanceCheck(from, to, ids, values, data); } /** * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}. * * Emits a {TransferBatch} event. * * Requirements: * * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the * acceptance magic value. * - `ids` and `values` must have the same length. */ function _safeBatchTransferFrom( address from, address to, uint256[] memory ids, uint256[] memory values, bytes memory data ) internal { if (to == address(0)) { revert ERC1155InvalidReceiver(address(0)); } if (from == address(0)) { revert ERC1155InvalidSender(address(0)); } _updateWithAcceptanceCheck(from, to, ids, values, data); } /** * @dev Sets a new URI for all token types, by relying on the token type ID * substitution mechanism * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP]. * * By this mechanism, any occurrence of the `\{id\}` substring in either the * URI or any of the values in the JSON file at said URI will be replaced by * clients with the token type ID. * * For example, the `https://token-cdn-domain/\{id\}.json` URI would be * interpreted by clients as * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json` * for token type ID 0x4cce0. * * See {uri}. * * Because these URIs cannot be meaningfully represented by the {URI} event, * this function emits no events. */ function _setURI(string memory newuri) internal virtual { _uri = newuri; } /** * @dev Creates a `value` amount of tokens of type `id`, and assigns them to `to`. * * Emits a {TransferSingle} event. * * Requirements: * * - `to` cannot be the zero address. * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the * acceptance magic value. */ function _mint(address to, uint256 id, uint256 value, bytes memory data) internal { if (to == address(0)) { revert ERC1155InvalidReceiver(address(0)); } (uint256[] memory ids, uint256[] memory values) = _asSingletonArrays(id, value); _updateWithAcceptanceCheck(address(0), to, ids, values, data); } /** * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}. * * Emits a {TransferBatch} event. * * Requirements: * * - `ids` and `values` must have the same length. * - `to` cannot be the zero address. * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the * acceptance magic value. */ function _mintBatch(address to, uint256[] memory ids, uint256[] memory values, bytes memory data) internal { if (to == address(0)) { revert ERC1155InvalidReceiver(address(0)); } _updateWithAcceptanceCheck(address(0), to, ids, values, data); } /** * @dev Destroys a `value` amount of tokens of type `id` from `from` * * Emits a {TransferSingle} event. * * Requirements: * * - `from` cannot be the zero address. * - `from` must have at least `value` amount of tokens of type `id`. */ function _burn(address from, uint256 id, uint256 value) internal { if (from == address(0)) { revert ERC1155InvalidSender(address(0)); } (uint256[] memory ids, uint256[] memory values) = _asSingletonArrays(id, value); _updateWithAcceptanceCheck(from, address(0), ids, values, ""); } /** * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}. * * Emits a {TransferBatch} event. * * Requirements: * * - `from` cannot be the zero address. * - `from` must have at least `value` amount of tokens of type `id`. * - `ids` and `values` must have the same length. */ function _burnBatch(address from, uint256[] memory ids, uint256[] memory values) internal { if (from == address(0)) { revert ERC1155InvalidSender(address(0)); } _updateWithAcceptanceCheck(from, address(0), ids, values, ""); } /** * @dev Approve `operator` to operate on all of `owner` tokens * * Emits an {ApprovalForAll} event. * * Requirements: * * - `operator` cannot be the zero address. */ function _setApprovalForAll(address owner, address operator, bool approved) internal virtual { if (operator == address(0)) { revert ERC1155InvalidOperator(address(0)); } _operatorApprovals[owner][operator] = approved; emit ApprovalForAll(owner, operator, approved); } /** * @dev Performs an acceptance check by calling {IERC1155-onERC1155Received} on the `to` address * if it contains code at the moment of execution. */ function _doSafeTransferAcceptanceCheck( address operator, address from, address to, uint256 id, uint256 value, bytes memory data ) private { if (to.code.length > 0) { try IERC1155Receiver(to).onERC1155Received(operator, from, id, value, data) returns (bytes4 response) { if (response != IERC1155Receiver.onERC1155Received.selector) { // Tokens rejected revert ERC1155InvalidReceiver(to); } } catch (bytes memory reason) { if (reason.length == 0) { // non-ERC1155Receiver implementer revert ERC1155InvalidReceiver(to); } else { /// @solidity memory-safe-assembly assembly { revert(add(32, reason), mload(reason)) } } } } } /** * @dev Performs a batch acceptance check by calling {IERC1155-onERC1155BatchReceived} on the `to` address * if it contains code at the moment of execution. */ function _doSafeBatchTransferAcceptanceCheck( address operator, address from, address to, uint256[] memory ids, uint256[] memory values, bytes memory data ) private { if (to.code.length > 0) { try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, values, data) returns ( bytes4 response ) { if (response != IERC1155Receiver.onERC1155BatchReceived.selector) { // Tokens rejected revert ERC1155InvalidReceiver(to); } } catch (bytes memory reason) { if (reason.length == 0) { // non-ERC1155Receiver implementer revert ERC1155InvalidReceiver(to); } else { /// @solidity memory-safe-assembly assembly { revert(add(32, reason), mload(reason)) } } } } } /** * @dev Creates an array in memory with only one value for each of the elements provided. */ function _asSingletonArrays( uint256 element1, uint256 element2 ) private pure returns (uint256[] memory array1, uint256[] memory array2) { /// @solidity memory-safe-assembly assembly { // Load the free memory pointer array1 := mload(0x40) // Set array length to 1 mstore(array1, 1) // Store the single element at the next word after the length (where content starts) mstore(add(array1, 0x20), element1) // Repeat for next array locating it right after the first array array2 := add(array1, 0x40) mstore(array2, 1) mstore(add(array2, 0x20), element2) // Update the free memory pointer by pointing after the second array mstore(0x40, add(array2, 0x40)) } }}

File 4 of 18 : ERC1155Supply.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/extensions/ERC1155Supply.sol)pragma solidity ^0.8.20;import {ERC1155} from "../ERC1155.sol";/** * @dev Extension of ERC1155 that adds tracking of total supply per id. * * Useful for scenarios where Fungible and Non-fungible tokens have to be * clearly identified. Note: While a totalSupply of 1 might mean the * corresponding is an NFT, there is no guarantees that no other token with the * same id are not going to be minted. * * NOTE: This contract implies a global limit of 2**256 - 1 to the number of tokens * that can be minted. * * CAUTION: This extension should not be added in an upgrade to an already deployed contract. */abstract contract ERC1155Supply is ERC1155 { mapping(uint256 id => uint256) private _totalSupply; uint256 private _totalSupplyAll; /** * @dev Total value of tokens in with a given id. */ function totalSupply(uint256 id) public view virtual returns (uint256) { return _totalSupply[id]; } /** * @dev Total value of tokens. */ function totalSupply() public view virtual returns (uint256) { return _totalSupplyAll; } /** * @dev Indicates whether any token exist with a given id, or not. */ function exists(uint256 id) public view virtual returns (bool) { return totalSupply(id) > 0; } /** * @dev See {ERC1155-_update}. */ function _update( address from, address to, uint256[] memory ids, uint256[] memory values ) internal virtual override { super._update(from, to, ids, values); if (from == address(0)) { uint256 totalMintValue = 0; for (uint256 i = 0; i < ids.length; ++i) { uint256 value = values[i]; // Overflow check required: The rest of the code assumes that totalSupply never overflows _totalSupply[ids[i]] += value; totalMintValue += value; } // Overflow check required: The rest of the code assumes that totalSupplyAll never overflows _totalSupplyAll += totalMintValue; } if (to == address(0)) { uint256 totalBurnValue = 0; for (uint256 i = 0; i < ids.length; ++i) { uint256 value = values[i]; unchecked { // Overflow not possible: values[i] <= balanceOf(from, ids[i]) <= totalSupply(ids[i]) _totalSupply[ids[i]] -= value; // Overflow not possible: sum_i(values[i]) <= sum_i(totalSupply(ids[i])) <= totalSupplyAll totalBurnValue += value; } } unchecked { // Overflow not possible: totalBurnValue = sum_i(values[i]) <= sum_i(totalSupply(ids[i])) <= totalSupplyAll _totalSupplyAll -= totalBurnValue; } } }}

File 5 of 18 : IERC1155MetadataURI.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/extensions/IERC1155MetadataURI.sol)pragma solidity ^0.8.20;import {IERC1155} from "../IERC1155.sol";/** * @dev Interface of the optional ERC1155MetadataExtension interface, as defined * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP]. */interface IERC1155MetadataURI is IERC1155 { /** * @dev Returns the URI for token type `id`. * * If the `\{id\}` substring is present in the URI, it must be replaced by * clients with the actual token type ID. */ function uri(uint256 id) external view returns (string memory);}

File 6 of 18 : IERC1155.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.1) (token/ERC1155/IERC1155.sol)pragma solidity ^0.8.20;import {IERC165} from "../../utils/introspection/IERC165.sol";/** * @dev Required interface of an ERC1155 compliant contract, as defined in the * https://eips.ethereum.org/EIPS/eip-1155[EIP]. */interface IERC1155 is IERC165 { /** * @dev Emitted when `value` amount of tokens of type `id` are transferred from `from` to `to` by `operator`. */ event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value); /** * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all * transfers. */ event TransferBatch( address indexed operator, address indexed from, address indexed to, uint256[] ids, uint256[] values ); /** * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to * `approved`. */ event ApprovalForAll(address indexed account, address indexed operator, bool approved); /** * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI. * * If an {URI} event was emitted for `id`, the standard * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value * returned by {IERC1155MetadataURI-uri}. */ event URI(string value, uint256 indexed id); /** * @dev Returns the value of tokens of token type `id` owned by `account`. * * Requirements: * * - `account` cannot be the zero address. */ function balanceOf(address account, uint256 id) external view returns (uint256); /** * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}. * * Requirements: * * - `accounts` and `ids` must have the same length. */ function balanceOfBatch( address[] calldata accounts, uint256[] calldata ids ) external view returns (uint256[] memory); /** * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`, * * Emits an {ApprovalForAll} event. * * Requirements: * * - `operator` cannot be the caller. */ function setApprovalForAll(address operator, bool approved) external; /** * @dev Returns true if `operator` is approved to transfer ``account``'s tokens. * * See {setApprovalForAll}. */ function isApprovedForAll(address account, address operator) external view returns (bool); /** * @dev Transfers a `value` amount of tokens of type `id` from `from` to `to`. * * WARNING: This function can potentially allow a reentrancy attack when transferring tokens * to an untrusted contract, when invoking {onERC1155Received} on the receiver. * Ensure to follow the checks-effects-interactions pattern and consider employing * reentrancy guards when interacting with untrusted contracts. * * Emits a {TransferSingle} event. * * Requirements: * * - `to` cannot be the zero address. * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}. * - `from` must have a balance of tokens of type `id` of at least `value` amount. * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the * acceptance magic value. */ function safeTransferFrom(address from, address to, uint256 id, uint256 value, bytes calldata data) external; /** * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}. * * WARNING: This function can potentially allow a reentrancy attack when transferring tokens * to an untrusted contract, when invoking {onERC1155BatchReceived} on the receiver. * Ensure to follow the checks-effects-interactions pattern and consider employing * reentrancy guards when interacting with untrusted contracts. * * Emits either a {TransferSingle} or a {TransferBatch} event, depending on the length of the array arguments. * * Requirements: * * - `ids` and `values` must have the same length. * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the * acceptance magic value. */ function safeBatchTransferFrom( address from, address to, uint256[] calldata ids, uint256[] calldata values, bytes calldata data ) external;}

File 7 of 18 : IERC1155Receiver.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/IERC1155Receiver.sol)pragma solidity ^0.8.20;import {IERC165} from "../../utils/introspection/IERC165.sol";/** * @dev Interface that must be implemented by smart contracts in order to receive * ERC-1155 token transfers. */interface IERC1155Receiver is IERC165 { /** * @dev Handles the receipt of a single ERC1155 token type. This function is * called at the end of a `safeTransferFrom` after the balance has been updated. * * NOTE: To accept the transfer, this must return * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` * (i.e. 0xf23a6e61, or its own function selector). * * @param operator The address which initiated the transfer (i.e. msg.sender) * @param from The address which previously owned the token * @param id The ID of the token being transferred * @param value The amount of tokens being transferred * @param data Additional data with no specified format * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed */ function onERC1155Received( address operator, address from, uint256 id, uint256 value, bytes calldata data ) external returns (bytes4); /** * @dev Handles the receipt of a multiple ERC1155 token types. This function * is called at the end of a `safeBatchTransferFrom` after the balances have * been updated. * * NOTE: To accept the transfer(s), this must return * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` * (i.e. 0xbc197c81, or its own function selector). * * @param operator The address which initiated the batch transfer (i.e. msg.sender) * @param from The address which previously owned the token * @param ids An array containing ids of each token being transferred (order and length must match values array) * @param values An array containing amounts of each token being transferred (order and length must match ids array) * @param data Additional data with no specified format * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed */ function onERC1155BatchReceived( address operator, address from, uint256[] calldata ids, uint256[] calldata values, bytes calldata data ) external returns (bytes4);}

File 8 of 18 : IERC20.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)pragma solidity ^0.8.20;/** * @dev Interface of the ERC20 standard as defined in the EIP. */interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the value of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the value of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves a `value` amount of tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 value) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets a `value` amount of tokens as the allowance of `spender` over the * caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 value) external returns (bool); /** * @dev Moves a `value` amount of tokens from `from` to `to` using the * allowance mechanism. `value` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom(address from, address to, uint256 value) external returns (bool);}

File 9 of 18 : Address.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)pragma solidity ^0.8.20;/** * @dev Collection of functions related to the address type */library Address { /** * @dev The ETH balance of the account is not enough to perform the operation. */ error AddressInsufficientBalance(address account); /** * @dev There's no code at `target` (it is not a contract). */ error AddressEmptyCode(address target); /** * @dev A call to an address target failed. The target may have reverted. */ error FailedInnerCall(); /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { if (address(this).balance < amount) { revert AddressInsufficientBalance(address(this)); } (bool success, ) = recipient.call{value: amount}(""); if (!success) { revert FailedInnerCall(); } } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason or custom error, it is bubbled * up by this function (like regular Solidity function calls). However, if * the call reverted with no returned reason, this function reverts with a * {FailedInnerCall} error. * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { if (address(this).balance < value) { revert AddressInsufficientBalance(address(this)); } (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an * unsuccessful call. */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata ) internal view returns (bytes memory) { if (!success) { _revert(returndata); } else { // only check if target is a contract if the call was successful and the return data is empty // otherwise we already know that it was a contract if (returndata.length == 0 && target.code.length == 0) { revert AddressEmptyCode(target); } return returndata; } } /** * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the * revert reason or with a default {FailedInnerCall} error. */ function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) { if (!success) { _revert(returndata); } else { return returndata; } } /** * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}. */ function _revert(bytes memory returndata) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert FailedInnerCall(); } }}

File 10 of 18 : Arrays.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (utils/Arrays.sol)pragma solidity ^0.8.20;import {StorageSlot} from "./StorageSlot.sol";import {Math} from "./math/Math.sol";/** * @dev Collection of functions related to array types. */library Arrays { using StorageSlot for bytes32; /** * @dev Searches a sorted `array` and returns the first index that contains * a value greater or equal to `element`. If no such index exists (i.e. all * values in the array are strictly less than `element`), the array length is * returned. Time complexity O(log n). * * `array` is expected to be sorted in ascending order, and to contain no * repeated elements. */ function findUpperBound(uint256[] storage array, uint256 element) internal view returns (uint256) { uint256 low = 0; uint256 high = array.length; if (high == 0) { return 0; } while (low < high) { uint256 mid = Math.average(low, high); // Note that mid will always be strictly less than high (i.e. it will be a valid array index) // because Math.average rounds towards zero (it does integer division with truncation). if (unsafeAccess(array, mid).value > element) { high = mid; } else { low = mid + 1; } } // At this point `low` is the exclusive upper bound. We will return the inclusive upper bound. if (low > 0 && unsafeAccess(array, low - 1).value == element) { return low - 1; } else { return low; } } /** * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check. * * WARNING: Only use if you are certain `pos` is lower than the array length. */ function unsafeAccess(address[] storage arr, uint256 pos) internal pure returns (StorageSlot.AddressSlot storage) { bytes32 slot; // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr` // following https://docs.soliditylang.org/en/v0.8.20/internals/layout_in_storage.html#mappings-and-dynamic-arrays. /// @solidity memory-safe-assembly assembly { mstore(0, arr.slot) slot := add(keccak256(0, 0x20), pos) } return slot.getAddressSlot(); } /** * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check. * * WARNING: Only use if you are certain `pos` is lower than the array length. */ function unsafeAccess(bytes32[] storage arr, uint256 pos) internal pure returns (StorageSlot.Bytes32Slot storage) { bytes32 slot; // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr` // following https://docs.soliditylang.org/en/v0.8.20/internals/layout_in_storage.html#mappings-and-dynamic-arrays. /// @solidity memory-safe-assembly assembly { mstore(0, arr.slot) slot := add(keccak256(0, 0x20), pos) } return slot.getBytes32Slot(); } /** * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check. * * WARNING: Only use if you are certain `pos` is lower than the array length. */ function unsafeAccess(uint256[] storage arr, uint256 pos) internal pure returns (StorageSlot.Uint256Slot storage) { bytes32 slot; // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr` // following https://docs.soliditylang.org/en/v0.8.20/internals/layout_in_storage.html#mappings-and-dynamic-arrays. /// @solidity memory-safe-assembly assembly { mstore(0, arr.slot) slot := add(keccak256(0, 0x20), pos) } return slot.getUint256Slot(); } /** * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check. * * WARNING: Only use if you are certain `pos` is lower than the array length. */ function unsafeMemoryAccess(uint256[] memory arr, uint256 pos) internal pure returns (uint256 res) { assembly { res := mload(add(add(arr, 0x20), mul(pos, 0x20))) } } /** * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check. * * WARNING: Only use if you are certain `pos` is lower than the array length. */ function unsafeMemoryAccess(address[] memory arr, uint256 pos) internal pure returns (address res) { assembly { res := mload(add(add(arr, 0x20), mul(pos, 0x20))) } }}

File 11 of 18 : Context.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)pragma solidity ^0.8.20;/** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */abstract contract Context { function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } function _contextSuffixLength() internal view virtual returns (uint256) { return 0; }}

File 12 of 18 : ERC165.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)pragma solidity ^0.8.20;import {IERC165} from "./IERC165.sol";/** * @dev Implementation of the {IERC165} interface. * * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check * for the additional interface id that will be supported. For example: * * ```solidity * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) { * return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId); * } * ``` */abstract contract ERC165 is IERC165 { /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) { return interfaceId == type(IERC165).interfaceId; }}

File 13 of 18 : IERC165.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)pragma solidity ^0.8.20;/** * @dev Interface of the ERC165 standard, as defined in the * https://eips.ethereum.org/EIPS/eip-165[EIP]. * * Implementers can declare support of contract interfaces, which can then be * queried by others ({ERC165Checker}). * * For an implementation, see {ERC165}. */interface IERC165 { /** * @dev Returns true if this contract implements the interface defined by * `interfaceId`. See the corresponding * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section] * to learn more about how these ids are created. * * This function call must use less than 30 000 gas. */ function supportsInterface(bytes4 interfaceId) external view returns (bool);}

File 14 of 18 : Math.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)pragma solidity ^0.8.20;/** * @dev Standard math utilities missing in the Solidity language. */library Math { /** * @dev Muldiv operation overflow. */ error MathOverflowedMulDiv(); enum Rounding { Floor, // Toward negative infinity Ceil, // Toward positive infinity Trunc, // Toward zero Expand // Away from zero } /** * @dev Returns the addition of two unsigned integers, with an overflow flag. */ function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { uint256 c = a + b; if (c < a) return (false, 0); return (true, c); } } /** * @dev Returns the subtraction of two unsigned integers, with an overflow flag. */ function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { if (b > a) return (false, 0); return (true, a - b); } } /** * @dev Returns the multiplication of two unsigned integers, with an overflow flag. */ function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) return (true, 0); uint256 c = a * b; if (c / a != b) return (false, 0); return (true, c); } } /** * @dev Returns the division of two unsigned integers, with a division by zero flag. */ function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { if (b == 0) return (false, 0); return (true, a / b); } } /** * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag. */ function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { if (b == 0) return (false, 0); return (true, a % b); } } /** * @dev Returns the largest of two numbers. */ function max(uint256 a, uint256 b) internal pure returns (uint256) { return a > b ? a : b; } /** * @dev Returns the smallest of two numbers. */ function min(uint256 a, uint256 b) internal pure returns (uint256) { return a < b ? a : b; } /** * @dev Returns the average of two numbers. The result is rounded towards * zero. */ function average(uint256 a, uint256 b) internal pure returns (uint256) { // (a + b) / 2 can overflow. return (a & b) + (a ^ b) / 2; } /** * @dev Returns the ceiling of the division of two numbers. * * This differs from standard division with `/` in that it rounds towards infinity instead * of rounding towards zero. */ function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) { if (b == 0) { // Guarantee the same behavior as in a regular Solidity division. return a / b; } // (a + b - 1) / b can overflow on addition, so we distribute. return a == 0 ? 0 : (a - 1) / b + 1; } /** * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or * denominator == 0. * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by * Uniswap Labs also under MIT license. */ function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) { unchecked { // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256 // variables such that product = prod1 * 2^256 + prod0. uint256 prod0 = x * y; // Least significant 256 bits of the product uint256 prod1; // Most significant 256 bits of the product assembly { let mm := mulmod(x, y, not(0)) prod1 := sub(sub(mm, prod0), lt(mm, prod0)) } // Handle non-overflow cases, 256 by 256 division. if (prod1 == 0) { // Solidity will revert if denominator == 0, unlike the div opcode on its own. // The surrounding unchecked block does not change this fact. // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic. return prod0 / denominator; } // Make sure the result is less than 2^256. Also prevents denominator == 0. if (denominator <= prod1) { revert MathOverflowedMulDiv(); } /////////////////////////////////////////////// // 512 by 256 division. /////////////////////////////////////////////// // Make division exact by subtracting the remainder from [prod1 prod0]. uint256 remainder; assembly { // Compute remainder using mulmod. remainder := mulmod(x, y, denominator) // Subtract 256 bit number from 512 bit number. prod1 := sub(prod1, gt(remainder, prod0)) prod0 := sub(prod0, remainder) } // Factor powers of two out of denominator and compute largest power of two divisor of denominator. // Always >= 1. See https://cs.stackexchange.com/q/138556/92363. uint256 twos = denominator & (0 - denominator); assembly { // Divide denominator by twos. denominator := div(denominator, twos) // Divide [prod1 prod0] by twos. prod0 := div(prod0, twos) // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one. twos := add(div(sub(0, twos), twos), 1) } // Shift in bits from prod1 into prod0. prod0 |= prod1 * twos; // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for // four bits. That is, denominator * inv = 1 mod 2^4. uint256 inverse = (3 * denominator) ^ 2; // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also // works in modular arithmetic, doubling the correct bits in each step. inverse *= 2 - denominator * inverse; // inverse mod 2^8 inverse *= 2 - denominator * inverse; // inverse mod 2^16 inverse *= 2 - denominator * inverse; // inverse mod 2^32 inverse *= 2 - denominator * inverse; // inverse mod 2^64 inverse *= 2 - denominator * inverse; // inverse mod 2^128 inverse *= 2 - denominator * inverse; // inverse mod 2^256 // Because the division is now exact we can divide by multiplying with the modular inverse of denominator. // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1 // is no longer required. result = prod0 * inverse; return result; } } /** * @notice Calculates x * y / denominator with full precision, following the selected rounding direction. */ function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) { uint256 result = mulDiv(x, y, denominator); if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) { result += 1; } return result; } /** * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded * towards zero. * * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11). */ function sqrt(uint256 a) internal pure returns (uint256) { if (a == 0) { return 0; } // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target. // // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`. // // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)` // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))` // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)` // // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit. uint256 result = 1 << (log2(a) >> 1); // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128, // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision // into the expected uint128 result. unchecked { result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; return min(result, a / result); } } /** * @notice Calculates sqrt(a), following the selected rounding direction. */ function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = sqrt(a); return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0); } } /** * @dev Return the log in base 2 of a positive value rounded towards zero. * Returns 0 if given 0. */ function log2(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >> 128 > 0) { value >>= 128; result += 128; } if (value >> 64 > 0) { value >>= 64; result += 64; } if (value >> 32 > 0) { value >>= 32; result += 32; } if (value >> 16 > 0) { value >>= 16; result += 16; } if (value >> 8 > 0) { value >>= 8; result += 8; } if (value >> 4 > 0) { value >>= 4; result += 4; } if (value >> 2 > 0) { value >>= 2; result += 2; } if (value >> 1 > 0) { result += 1; } } return result; } /** * @dev Return the log in base 2, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log2(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log2(value); return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0); } } /** * @dev Return the log in base 10 of a positive value rounded towards zero. * Returns 0 if given 0. */ function log10(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >= 10 ** 64) { value /= 10 ** 64; result += 64; } if (value >= 10 ** 32) { value /= 10 ** 32; result += 32; } if (value >= 10 ** 16) { value /= 10 ** 16; result += 16; } if (value >= 10 ** 8) { value /= 10 ** 8; result += 8; } if (value >= 10 ** 4) { value /= 10 ** 4; result += 4; } if (value >= 10 ** 2) { value /= 10 ** 2; result += 2; } if (value >= 10 ** 1) { result += 1; } } return result; } /** * @dev Return the log in base 10, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log10(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log10(value); return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0); } } /** * @dev Return the log in base 256 of a positive value rounded towards zero. * Returns 0 if given 0. * * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string. */ function log256(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >> 128 > 0) { value >>= 128; result += 16; } if (value >> 64 > 0) { value >>= 64; result += 8; } if (value >> 32 > 0) { value >>= 32; result += 4; } if (value >> 16 > 0) { value >>= 16; result += 2; } if (value >> 8 > 0) { result += 1; } } return result; } /** * @dev Return the log in base 256, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log256(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log256(value); return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0); } } /** * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers. */ function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) { return uint8(rounding) % 2 == 1; }}

File 15 of 18 : SignedMath.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)pragma solidity ^0.8.20;/** * @dev Standard signed math utilities missing in the Solidity language. */library SignedMath { /** * @dev Returns the largest of two signed numbers. */ function max(int256 a, int256 b) internal pure returns (int256) { return a > b ? a : b; } /** * @dev Returns the smallest of two signed numbers. */ function min(int256 a, int256 b) internal pure returns (int256) { return a < b ? a : b; } /** * @dev Returns the average of two signed numbers without overflow. * The result is rounded towards zero. */ function average(int256 a, int256 b) internal pure returns (int256) { // Formula from the book "Hacker's Delight" int256 x = (a & b) + ((a ^ b) >> 1); return x + (int256(uint256(x) >> 255) & (a ^ b)); } /** * @dev Returns the absolute unsigned value of a signed value. */ function abs(int256 n) internal pure returns (uint256) { unchecked { // must be unchecked in order to support `n = type(int256).min` return uint256(n >= 0 ? n : -n); } }}

File 16 of 18 : StorageSlot.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.pragma solidity ^0.8.20;/** * @dev Library for reading and writing primitive types to specific storage slots. * * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts. * This library helps with reading and writing to such slots without the need for inline assembly. * * The functions in this library return Slot structs that contain a `value` member that can be used to read or write. * * Example usage to set ERC1967 implementation slot: * ```solidity * contract ERC1967 { * bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc; * * function _getImplementation() internal view returns (address) { * return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value; * } * * function _setImplementation(address newImplementation) internal { * require(newImplementation.code.length > 0); * StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation; * } * } * ``` */library StorageSlot { struct AddressSlot { address value; } struct BooleanSlot { bool value; } struct Bytes32Slot { bytes32 value; } struct Uint256Slot { uint256 value; } struct StringSlot { string value; } struct BytesSlot { bytes value; } /** * @dev Returns an `AddressSlot` with member `value` located at `slot`. */ function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `BooleanSlot` with member `value` located at `slot`. */ function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `Bytes32Slot` with member `value` located at `slot`. */ function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `Uint256Slot` with member `value` located at `slot`. */ function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `StringSlot` with member `value` located at `slot`. */ function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `StringSlot` representation of the string storage pointer `store`. */ function getStringSlot(string storage store) internal pure returns (StringSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := store.slot } } /** * @dev Returns an `BytesSlot` with member `value` located at `slot`. */ function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`. */ function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := store.slot } }}

File 17 of 18 : Strings.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)pragma solidity ^0.8.20;import {Math} from "./math/Math.sol";import {SignedMath} from "./math/SignedMath.sol";/** * @dev String operations. */library Strings { bytes16 private constant HEX_DIGITS = "0123456789abcdef"; uint8 private constant ADDRESS_LENGTH = 20; /** * @dev The `value` string doesn't fit in the specified `length`. */ error StringsInsufficientHexLength(uint256 value, uint256 length); /** * @dev Converts a `uint256` to its ASCII `string` decimal representation. */ function toString(uint256 value) internal pure returns (string memory) { unchecked { uint256 length = Math.log10(value) + 1; string memory buffer = new string(length); uint256 ptr; /// @solidity memory-safe-assembly assembly { ptr := add(buffer, add(32, length)) } while (true) { ptr--; /// @solidity memory-safe-assembly assembly { mstore8(ptr, byte(mod(value, 10), HEX_DIGITS)) } value /= 10; if (value == 0) break; } return buffer; } } /** * @dev Converts a `int256` to its ASCII `string` decimal representation. */ function toStringSigned(int256 value) internal pure returns (string memory) { return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value))); } /** * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation. */ function toHexString(uint256 value) internal pure returns (string memory) { unchecked { return toHexString(value, Math.log256(value) + 1); } } /** * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length. */ function toHexString(uint256 value, uint256 length) internal pure returns (string memory) { uint256 localValue = value; bytes memory buffer = new bytes(2 * length + 2); buffer[0] = "0"; buffer[1] = "x"; for (uint256 i = 2 * length + 1; i > 1; --i) { buffer[i] = HEX_DIGITS[localValue & 0xf]; localValue >>= 4; } if (localValue != 0) { revert StringsInsufficientHexLength(value, length); } return string(buffer); } /** * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal * representation. */ function toHexString(address addr) internal pure returns (string memory) { return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH); } /** * @dev Returns true if the two strings are equal. */ function equal(string memory a, string memory b) internal pure returns (bool) { return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b)); }}

File 18 of 18 : FoundersPoolToken.sol

// SPDX-License-Identifier: MITpragma solidity ^0.8;import "@openzeppelin/contracts/token/ERC1155/extensions/ERC1155Supply.sol";import "@openzeppelin/contracts/token/ERC20/IERC20.sol";import "@openzeppelin/contracts/access/Ownable.sol";import "@openzeppelin/contracts/utils/Address.sol";import "@openzeppelin/contracts/utils/Strings.sol";contract FoundersPoolToken is ERC1155Supply, Ownable { using Strings for string; using Address for address; address public feeWallet; address[] public allowedDepositTokens; mapping (uint256 => uint256) public maxCapacity; mapping (uint256 => uint256) public currentPrice; string private baseUri = "https://fp-nft.candao.io/"; string private _name; string private _symbol; event FeeWalletUpdated(address wallet); event MaxCapacityUpdated(uint256 tokenId, uint256 amount); event AllowedDepositTokenAdded(address token); event AllowedDepositTokenRemoved(address token); event CurrentPriceUpdated(uint256 tokenId, uint256 amount); constructor() Ownable(msg.sender) ERC1155(baseUri) { feeWallet = msg.sender; _name = "Candao Founders Pool"; _symbol = "CDOFP"; } function buy(uint256 depositTokenIndex, uint256 tokenId) public { require(totalSupply(tokenId) <= maxCapacity[tokenId], "Max Capacity reached"); IERC20 depositToken = IERC20(allowedDepositTokens[depositTokenIndex]); bool success = depositToken.transferFrom(msg.sender, feeWallet, currentPrice[tokenId]); if (success) { _mint(msg.sender, tokenId, 1, ""); } } function uri( uint256 _id ) public override view returns (string memory) { return string(abi.encodePacked(baseUri, Strings.toHexString(_id))); } function setFeeWallet(address wallet) public onlyOwner { feeWallet = wallet; emit FeeWalletUpdated(wallet); } function setMaxCapacity(uint256 tokenId, uint256 amount) public onlyOwner { maxCapacity[tokenId] = amount; emit MaxCapacityUpdated(tokenId, amount); } function setCurrentPrice(uint256 tokenId, uint256 amount) public onlyOwner { currentPrice[tokenId] = amount; emit CurrentPriceUpdated(tokenId, amount); } function addAllowedDepositToken(address token) public onlyOwner { allowedDepositTokens.push(token); emit AllowedDepositTokenAdded(token); } function removeAllowedDepositToken(uint256 index) public onlyOwner { address token = allowedDepositTokens[index]; delete allowedDepositTokens[index]; emit AllowedDepositTokenRemoved(token); } function mint(address wallet, uint256 tokenId) public onlyOwner { _mint(wallet, tokenId, 1, ""); } function setUri( string memory _newUri ) public onlyOwner { _setURI(_newUri); baseUri = _newUri; } function getAllowedTokens() public view returns (address[] memory) { return allowedDepositTokens; } function name() public view returns (string memory) { return _name; } function symbol() public view returns (string memory) { return _symbol; } function safeTransferFrom( address from, address to, uint256 id, uint256 amount, bytes memory data ) public virtual override { revert("Transfers disabled"); } function safeBatchTransferFrom( address from, address to, uint256[] memory ids, uint256[] memory amounts, bytes memory data ) public virtual override { revert("Transfers disabled"); }}

Settings

{ "optimizer": { "enabled": true, "runs": 200 }, "evmVersion": "paris", "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } }, "libraries": {}}

Contract Security Audit

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ERC1155InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC1155InvalidApprover","type":"error"},{"inputs":[{"internalType":"uint256","name":"idsLength","type":"uint256"},{"internalType":"uint256","name":"valuesLength","type":"uint256"}],"name":"ERC1155InvalidArrayLength","type":"error"},{"inputs":[{"internalType":"address","name":"operator","type":"address"}],"name":"ERC1155InvalidOperator","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC1155InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC1155InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC1155MissingApprovalForAll","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"length","type":"uint256"}],"name":"StringsInsufficientHexLength","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"}],"name":"AllowedDepositTokenAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"}],"name":"AllowedDepositTokenRemoved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"CurrentPriceUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"wallet","type":"address"}],"name":"FeeWalletUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"MaxCapacityUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256[]","name":"ids","type":"uint256[]"},{"indexed":false,"internalType":"uint256[]","name":"values","type":"uint256[]"}],"name":"TransferBatch","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"id","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"TransferSingle","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"string","name":"value","type":"string"},{"indexed":true,"internalType":"uint256","name":"id","type":"uint256"}],"name":"URI","type":"event"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"addAllowedDepositToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"allowedDepositTokens","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"id","type":"uint256"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"accounts","type":"address[]"},{"internalType":"uint256[]","name":"ids","type":"uint256[]"}],"name":"balanceOfBatch","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"depositTokenIndex","type":"uint256"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"buy","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"currentPrice","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"id","type":"uint256"}],"name":"exists","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"feeWallet","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getAllowedTokens","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"maxCapacity","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"wallet","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"index","type":"uint256"}],"name":"removeAllowedDepositToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256[]","name":"ids","type":"uint256[]"},{"internalType":"uint256[]","name":"amounts","type":"uint256[]"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeBatchTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"id","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"setCurrentPrice","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"wallet","type":"address"}],"name":"setFeeWallet","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"setMaxCapacity","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_newUri","type":"string"}],"name":"setUri","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"id","type":"uint256"}],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_id","type":"uint256"}],"name":"uri","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"}]

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

Deployed Bytecode

0x608060405234801561001057600080fd5b50600436106101ce5760003560e01c80637a3c4c1711610104578063c0eac886116100a2578063e985e9c511610071578063e985e9c51461040b578063f242432a14610447578063f25f4b5614610455578063f2fde38b1461046857600080fd5b8063c0eac886146103b2578063d6febde8146103d2578063dc037339146103e5578063e673a45a146103f857600080fd5b806395d89b41116100de57806395d89b41146103645780639b642de11461036c578063a22cb4651461037f578063bd85b0391461039257600080fd5b80637a3c4c171461030c5780638da5cb5b1461032c57806390d49b9d1461035157600080fd5b80631dc97aee116101715780634e1273f41161014b5780634e1273f4146102af5780634f558e79146102cf578063715018a6146102f1578063789068b7146102f957600080fd5b80631dc97aee146102765780632eb2c2d61461028957806340c10f191461029c57600080fd5b806306fdde03116101ad57806306fdde03146102315780630e89341c146102465780630e95b7c81461025957806318160ddd1461026e57600080fd5b8062fdd58e146101d357806301ffc9a7146101f9578063024ece891461021c575b600080fd5b6101e66101e13660046114cb565b61047b565b6040519081526020015b60405180910390f35b61020c61020736600461150b565b6104a3565b60405190151581526020016101f0565b6102246104f3565b6040516101f0919061152f565b610239610555565b6040516101f091906115cc565b6102396102543660046115df565b6105de565b61026c6102673660046115f8565b610612565b005b6004546101e6565b61026c6102843660046115df565b61069f565b61026c610297366004611765565b610743565b61026c6102aa3660046114cb565b610785565b6102c26102bd36600461180f565b6107ad565b6040516101f0919061190b565b61020c6102dd3660046115df565b600090815260036020526040902054151590565b61026c61087a565b61026c61030736600461191e565b61088e565b6101e661031a3660046115df565b60096020526000908152604090205481565b6005546001600160a01b03165b6040516001600160a01b0390911681526020016101f0565b61026c61035f3660046115f8565b6108de565b610239610934565b61026c61037a366004611940565b610943565b61026c61038d366004611997565b610960565b6101e66103a03660046115df565b60009081526003602052604090205490565b6101e66103c03660046115df565b60086020526000908152604090205481565b61026c6103e036600461191e565b61096b565b61026c6103f336600461191e565b610aa6565b6103396104063660046115df565b610af6565b61020c6104193660046119ce565b6001600160a01b03918216600090815260016020908152604080832093909416825291909152205460ff1690565b61026c610297366004611a01565b600654610339906001600160a01b031681565b61026c6104763660046115f8565b610b20565b6000818152602081815260408083206001600160a01b03861684529091529020545b92915050565b60006001600160e01b03198216636cdb3d1360e11b14806104d457506001600160e01b031982166303a24d0760e21b145b8061049d57506301ffc9a760e01b6001600160e01b031983161461049d565b6060600780548060200260200160405190810160405280929190818152602001828054801561054b57602002820191906000526020600020905b81546001600160a01b0316815260019091019060200180831161052d575b5050505050905090565b6060600b805461056490611a66565b80601f016020809104026020016040519081016040528092919081815260200182805461059090611a66565b801561054b5780601f106105b25761010080835404028352916020019161054b565b820191906000526020600020905b8154815290600101906020018083116105c057509395945050505050565b6060600a6105eb83610b5e565b6040516020016105fc929190611aa0565b6040516020818303038152906040529050919050565b61061a610b75565b600780546001810182556000919091527fa66cc928b5edb82af9bd49922954155ab7b0942694bea4ce44661d9a8736c6880180546001600160a01b0319166001600160a01b0383169081179091556040519081527f8fb304ee3e391801229f63a2cbaf3ed9419edcf4b4df78988eaf9a6c78b765c9906020015b60405180910390a150565b6106a7610b75565b6000600782815481106106bc576106bc611b27565b600091825260209091200154600780546001600160a01b03909216925090839081106106ea576106ea611b27565b60009182526020918290200180546001600160a01b03191690556040516001600160a01b03831681527f55965b635ee62b8292c262fad990b720902481ccc237915ac05690e54fb77f9691015b60405180910390a15050565b60405162461bcd60e51b8152602060048201526012602482015271151c985b9cd9995c9cc8191a5cd8589b195960721b60448201526064015b60405180910390fd5b61078d610b75565b6107a98282600160405180602001604052806000815250610ba2565b5050565b606081518351146107de5781518351604051635b05999160e01b81526004810192909252602482015260440161077c565b6000835167ffffffffffffffff8111156107fa576107fa611613565b604051908082528060200260200182016040528015610823578160200160208202803683370190505b50905060005b84518110156108725760208082028601015161084d9060208084028701015161047b565b82828151811061085f5761085f611b27565b6020908102919091010152600101610829565b509392505050565b610882610b75565b61088c6000610c07565b565b610896610b75565b60008281526009602090815260409182902083905581518481529081018390527f9a0a9c8e3a8c84bcba8ec8b6a075bcf5b480e66018547c1b4f85207b76212b1f9101610737565b6108e6610b75565b600680546001600160a01b0319166001600160a01b0383169081179091556040519081527f29acee77dafcfa0143d74a7ea236018f3a6e1fa71e27fc59bbfbc6b8ca8edccd90602001610694565b6060600c805461056490611a66565b61094b610b75565b61095481610c59565b600a6107a98282611b8a565b6107a9338383610c65565b60008181526008602090815260408083205460039092529091205411156109cb5760405162461bcd60e51b815260206004820152601460248201527313585e0810d85c1858da5d1e481c995858da195960621b604482015260640161077c565b6000600783815481106109e0576109e0611b27565b600091825260208083209190910154600654858452600990925260408084205490516323b872dd60e01b81523360048201526001600160a01b03938416602482015260448101919091529116925082906323b872dd906064016020604051808303816000875af1158015610a58573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190610a7c9190611c4a565b90508015610aa057610aa03384600160405180602001604052806000815250610ba2565b50505050565b610aae610b75565b60008281526008602090815260409182902083905581518481529081018390527f622caf2f289671678339785daaafffb9e3a46364c1187ed87df4606f2714ac749101610737565b60078181548110610b0657600080fd5b6000918252602090912001546001600160a01b0316905081565b610b28610b75565b6001600160a01b038116610b5257604051631e4fbdf760e01b81526000600482015260240161077c565b610b5b81610c07565b50565b606061049d82610b6d84610cfb565b600101610d65565b6005546001600160a01b0316331461088c5760405163118cdaa760e01b815233600482015260240161077c565b6001600160a01b038416610bcc57604051632bfa23e760e11b81526000600482015260240161077c565b60408051600180825260208201869052818301908152606082018590526080820190925290610bff600087848487610ee5565b505050505050565b600580546001600160a01b038381166001600160a01b0319831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e090600090a35050565b60026107a98282611b8a565b6001600160a01b038216610c8e5760405162ced3e160e81b81526000600482015260240161077c565b6001600160a01b03838116600081815260016020908152604080832094871680845294825291829020805460ff191686151590811790915591519182527f17307eab39ab6107e8899845ad3d59bd9653f200f220920489ca2b5937696c31910160405180910390a3505050565b600080608083901c15610d135760809290921c916010015b604083901c15610d285760409290921c916008015b602083901c15610d3d5760209290921c916004015b601083901c15610d525760109290921c916002015b600883901c1561049d5760010192915050565b6060826000610d75846002611c7d565b610d80906002611c94565b67ffffffffffffffff811115610d9857610d98611613565b6040519080825280601f01601f191660200182016040528015610dc2576020820181803683370190505b509050600360fc1b81600081518110610ddd57610ddd611b27565b60200101906001600160f81b031916908160001a905350600f60fb1b81600181518110610e0c57610e0c611b27565b60200101906001600160f81b031916908160001a9053506000610e30856002611c7d565b610e3b906001611c94565b90505b6001811115610eb3576f181899199a1a9b1b9c1cb0b131b232b360811b83600f1660108110610e6f57610e6f611b27565b1a60f81b828281518110610e8557610e85611b27565b60200101906001600160f81b031916908160001a90535060049290921c91610eac81611ca7565b9050610e3e565b508115610edd5760405163e22e27eb60e01b8152600481018690526024810185905260440161077c565b949350505050565b610ef185858585610f3f565b6001600160a01b03841615610f385782513390600103610f2a5760208481015190840151610f23838989858589611085565b5050610bff565b610bff8187878787876111b2565b5050505050565b610f4b8484848461129b565b6001600160a01b038416610ff5576000805b8351811015610fdb576000838281518110610f7a57610f7a611b27565b602002602001015190508060036000878581518110610f9b57610f9b611b27565b602002602001015181526020019081526020016000206000828254610fc09190611c94565b90915550610fd090508184611c94565b925050600101610f5d565b508060046000828254610fee9190611c94565b9091555050505b6001600160a01b038316610aa0576000805b835181101561107457600083828151811061102457611024611b27565b60200260200101519050806003600087858151811061104557611045611b27565b602090810291909101810151825281019190915260400160002080549190910390559190910190600101611007565b506004805491909103905550505050565b6001600160a01b0384163b15610bff5760405163f23a6e6160e01b81526001600160a01b0385169063f23a6e61906110c99089908990889088908890600401611cbe565b6020604051808303816000875af1925050508015611104575060408051601f3d908101601f1916820190925261110191810190611d03565b60015b61116d573d808015611132576040519150601f19603f3d011682016040523d82523d6000602084013e611137565b606091505b50805160000361116557604051632bfa23e760e11b81526001600160a01b038616600482015260240161077c565b805181602001fd5b6001600160e01b0319811663f23a6e6160e01b146111a957604051632bfa23e760e11b81526001600160a01b038616600482015260240161077c565b50505050505050565b6001600160a01b0384163b15610bff5760405163bc197c8160e01b81526001600160a01b0385169063bc197c81906111f69089908990889088908890600401611d20565b6020604051808303816000875af1925050508015611231575060408051601f3d908101601f1916820190925261122e91810190611d03565b60015b61125f573d808015611132576040519150601f19603f3d011682016040523d82523d6000602084013e611137565b6001600160e01b0319811663bc197c8160e01b146111a957604051632bfa23e760e11b81526001600160a01b038616600482015260240161077c565b80518251146112ca5781518151604051635b05999160e01b81526004810192909252602482015260440161077c565b3360005b83518110156113d0576020818102858101820151908501909101516001600160a01b03881615611381576000828152602081815260408083206001600160a01b038c1684529091529020548181101561135a576040516303dee4c560e01b81526001600160a01b038a16600482015260248101829052604481018390526064810184905260840161077c565b6000838152602081815260408083206001600160a01b038d16845290915290209082900390555b6001600160a01b038716156113c6576000828152602081815260408083206001600160a01b038b168452909152812080548392906113c0908490611c94565b90915550505b50506001016112ce565b5082516001036114515760208301516000906020840151909150856001600160a01b0316876001600160a01b0316846001600160a01b03167fc3d58168c5ae7397731d063d5bbf3d657854427343f4c083240f7aacaa2d0f628585604051611442929190918252602082015260400190565b60405180910390a45050610f38565b836001600160a01b0316856001600160a01b0316826001600160a01b03167f4a39dc06d4c0dbc64b70af90fd698a233a518aa5d07e595d983b8c0526c8f7fb86866040516114a0929190611d7e565b60405180910390a45050505050565b80356001600160a01b03811681146114c657600080fd5b919050565b600080604083850312156114de57600080fd5b6114e7836114af565b946020939093013593505050565b6001600160e01b031981168114610b5b57600080fd5b60006020828403121561151d57600080fd5b8135611528816114f5565b9392505050565b6020808252825182820181905260009190848201906040850190845b818110156115705783516001600160a01b03168352928401929184019160010161154b565b50909695505050505050565b60005b8381101561159757818101518382015260200161157f565b50506000910152565b600081518084526115b881602086016020860161157c565b601f01601f19169290920160200192915050565b60208152600061152860208301846115a0565b6000602082840312156115f157600080fd5b5035919050565b60006020828403121561160a57600080fd5b611528826114af565b634e487b7160e01b600052604160045260246000fd5b604051601f8201601f1916810167ffffffffffffffff8111828210171561165257611652611613565b604052919050565b600067ffffffffffffffff82111561167457611674611613565b5060051b60200190565b600082601f83011261168f57600080fd5b813560206116a461169f8361165a565b611629565b8083825260208201915060208460051b8701019350868411156116c657600080fd5b602086015b848110156116e257803583529183019183016116cb565b509695505050505050565b600067ffffffffffffffff83111561170757611707611613565b61171a601f8401601f1916602001611629565b905082815283838301111561172e57600080fd5b828260208301376000602084830101529392505050565b600082601f83011261175657600080fd5b611528838335602085016116ed565b600080600080600060a0868803121561177d57600080fd5b611786866114af565b9450611794602087016114af565b9350604086013567ffffffffffffffff808211156117b157600080fd5b6117bd89838a0161167e565b945060608801359150808211156117d357600080fd5b6117df89838a0161167e565b935060808801359150808211156117f557600080fd5b5061180288828901611745565b9150509295509295909350565b6000806040838503121561182257600080fd5b823567ffffffffffffffff8082111561183a57600080fd5b818501915085601f83011261184e57600080fd5b8135602061185e61169f8361165a565b82815260059290921b8401810191818101908984111561187d57600080fd5b948201945b838610156118a257611893866114af565b82529482019490820190611882565b965050860135925050808211156118b857600080fd5b506118c58582860161167e565b9150509250929050565b60008151808452602080850194506020840160005b83811015611900578151875295820195908201906001016118e4565b509495945050505050565b60208152600061152860208301846118cf565b6000806040838503121561193157600080fd5b50508035926020909101359150565b60006020828403121561195257600080fd5b813567ffffffffffffffff81111561196957600080fd5b8201601f8101841361197a57600080fd5b610edd848235602084016116ed565b8015158114610b5b57600080fd5b600080604083850312156119aa57600080fd5b6119b3836114af565b915060208301356119c381611989565b809150509250929050565b600080604083850312156119e157600080fd5b6119ea836114af565b91506119f8602084016114af565b90509250929050565b600080600080600060a08688031215611a1957600080fd5b611a22866114af565b9450611a30602087016114af565b93506040860135925060608601359150608086013567ffffffffffffffff811115611a5a57600080fd5b61180288828901611745565b600181811c90821680611a7a57607f821691505b602082108103611a9a57634e487b7160e01b600052602260045260246000fd5b50919050565b6000808454611aae81611a66565b60018281168015611ac65760018114611adb57611b0a565b60ff1984168752821515830287019450611b0a565b8860005260208060002060005b85811015611b015781548a820152908401908201611ae8565b50505082870194505b505050508351611b1e81836020880161157c565b01949350505050565b634e487b7160e01b600052603260045260246000fd5b601f821115611b85576000816000526020600020601f850160051c81016020861015611b665750805b601f850160051c820191505b81811015610bff57828155600101611b72565b505050565b815167ffffffffffffffff811115611ba457611ba4611613565b611bb881611bb28454611a66565b84611b3d565b602080601f831160018114611bed5760008415611bd55750858301515b600019600386901b1c1916600185901b178555610bff565b600085815260208120601f198616915b82811015611c1c57888601518255948401946001909101908401611bfd565b5085821015611c3a5787850151600019600388901b60f8161c191681555b5050505050600190811b01905550565b600060208284031215611c5c57600080fd5b815161152881611989565b634e487b7160e01b600052601160045260246000fd5b808202811582820484141761049d5761049d611c67565b8082018082111561049d5761049d611c67565b600081611cb657611cb6611c67565b506000190190565b6001600160a01b03868116825285166020820152604081018490526060810183905260a060808201819052600090611cf8908301846115a0565b979650505050505050565b600060208284031215611d1557600080fd5b8151611528816114f5565b6001600160a01b0386811682528516602082015260a060408201819052600090611d4c908301866118cf565b8281036060840152611d5e81866118cf565b90508281036080840152611d7281856115a0565b98975050505050505050565b604081526000611d9160408301856118cf565b8281036020840152611da381856118cf565b9594505050505056fea2646970667358221220dba42844779e473ec4fee6f0ab0e5a48b444ad0575e7203bed20e096aa3fef2c64736f6c63430008190033